Skip to main content
Civil Concrete & Driveway Specialists

Concrete Driveway & Civil Contractors Auckland

High-strength concrete driveways, commercial slabs, reinforced footings, Auckland Transport VX0102 vehicle crossings, and civil concrete infrastructure across Greater Auckland.

Concrete Driveways & Vehicle Crossings

Exposed aggregate, plain broom finish, and heavy-duty reinforced driveways built to Auckland Transport VX0102 crossing standards.

  • AT VX0102 compliant vehicle crossing construction
  • Steel mesh reinforcement & NZS 3109 standards
  • Exposed aggregate & decorative finishes

Commercial Slabs & Civil Works

Commercial building pads, loading bays, retaining wall foundations, and public footpath concrete works.

  • Heavy-duty commercial floor slabs & pads
  • Structural concrete footings & aprons
  • Council asset concrete reinstatements

Concrete Driveways, Slabs & Vehicle Crossings

Durable concrete begins with a properly compacted sub-base, accurate boxing, and correctly tied steel reinforcement. Craft Civil Contractors pours residential driveways, commercial slabs, and footpaths across Auckland, integrating driveway channel drainage to manage surface runoff effectively.

We construct Auckland Transport approved vehicle crossings complying with Unitary Plan Chapter E27 and TDM Drawing VX0102 standards, supporting subdivision driveways across Papakura, Drury and South Auckland. Every project includes subgrade earthworks compaction, base metal preparation, and certified 25MPa to 40MPa concrete mixes tailored to traffic loads.

Exposed Aggregate Driveways, Steel Mesh Reinforcing & Kerb Construction

Our concrete installation includes excavation, GAP20 base metal compaction, Damp-Proof Membrane (DPM) polythene laying, SE62/SE72 steel mesh tying, pouring, and decorative finishing for civil and residential applications.

We pour exposed aggregate driveways, plain broom-finished concrete, kerb and layby crossings, and dished channels, including full drainlaying trenching reinstatement following pipe repairs. Every pour adheres to NZS 3109 structural concrete standards, incorporating expansion joints to prevent cracking and surface damage.

Auckland Transport TDM VX0102 Vehicle Crossing Approvals & Compliance

Constructing or altering a driveway vehicle crossing over a public berm or footpath requires formal Auckland Transport approval under Unitary Plan Chapter E27 and Transport Design Manual (TDM) Drawing VX0102 standards. Crossings must be engineered with reinforced layby kerb cuts, specific transition gradients, and heavy-duty concrete to withstand repeated vehicle wheel loading without damaging public footpath assets.

Craft Civil Contractors manages the entire process—from submitting Corridor Access Requests (CAR) and Traffic Management Plans (TMP) to excavation, boxing, AT pre-pour inspections, and final smooth concrete finishing.

NZS 3109 Structural Concrete, SE62 Steel Mesh & Decorative Finishes

Every structural driveway and commercial slab we pour adheres to NZS 3109 specifications. We lay Damp-Proof Membrane (DPM) polythene moisture barriers over compacted GAP20 sub-base metal, tie SE62 or SE72 structural ductile steel mesh on reinforcing chairs, and pour certified 25MPa to 40MPa ready-mix concrete.

We offer durable plain broom finishes, non-slip acid-wash concrete, and premium exposed aggregate driveways washed and sealed with UV-resistant acrylic sealers to protect against moss growth and vehicle oil stains.

Concrete driveway pour and reinforced slab preparation in Auckland
Auckland • Reinforced Vehicle Crossing & Concrete Pour

Key Tasks & Focus Areas

  • Auckland Transport approved vehicle crossing construction (TDM VX0102)
  • Exposed aggregate and decorative concrete driveway pours
  • Residential house slab and commercial floor slab construction
  • Footpath, walkway, and patio concrete installation
  • Kerb and channel, layby, and dished channel construction
  • NZS 3109 compliant formwork and SE62/SE72 steel mesh tying
  • Damp-Proof Membrane (DPM) polythene laying and subgrade compaction
  • Concrete saw cutting, expansion joint sealing, and curing
  • Concrete cutting, breaking, and old slab removal
  • Concrete repair, resurfacing, and surface restoration

Why Trust Craft Civil

  • We construct Auckland Transport approved vehicle crossings meeting TDM VX0102 standards
  • All structural concrete pours comply with NZS 3109 construction specifications
  • We place SE62/SE72 steel mesh reinforcement to prevent cracking under load
  • We offer exposed aggregate, plain broom, and decorative concrete finishes
  • Our team manages subgrade metal compaction and DPM moisture barrier installation
  • We maintain clear communication from box formwork to final sealing
  • We provide competitive pricing without lowering material or pour quality
✦ Operational Quality Control

Our 4-Step Civil Execution Process

Every project follows a transparent, code-compliant delivery model engineered for Auckland conditions.

01

Site Assessment & GeoMaps Verification

We verify private-to-public point of connection boundaries using Auckland Council GeoMaps GIS records, inspect site levels, and locate existing underground utilities before digging.

✓ GeoMaps GIS Check
02

Safe Excavation & Subgrade Bedding

Trench excavation is executed with safe shoring and utility clearance. We prepare trenches with graded GAP20 aggregate bedding to protect pipework against Auckland Waitemata clay ground movement.

✓ GAP20 Aggregate Bedding
03

Laser Alignment & Hydrostatic Testing

Pipework is laid to exact NZ Building Code Clause E1 (Surface Water) and G13 (Foul Water) gradients using dual-grade laser levels, followed by hydrostatic water pressure testing.

✓ NZBC E1/G13 Tested
04

Backfill Compaction & As-Built Sign-Off

Backfilling is completed in compacted aggregate layers. We prepare scaled As-Built drainage plans and issue Producer Statement PS3 documentation for Auckland Council Code Compliance Certificates (CCC).

✓ PS3 / CCC Sign-Off

Frequently Asked Questions

What is required for an Auckland Transport (AT) vehicle crossing approval (TDM VX0102)?
Driveway vehicle crossings over public footpaths require Auckland Transport approval under Unitary Plan E27, adhering to TDM Drawing VX0102 specifications for width, gradient, layby kerb cuts, and concrete strength.
How much does an exposed aggregate concrete driveway cost per m² in Auckland?
Exposed aggregate driveways generally range from $120 to $200 per m² depending on excavation, base metal metal depth, mesh reinforcement, and decorative aggregate selection.
Why is SE62 steel mesh reinforcement used in concrete driveway pours (NZS 3109)?
SE62 steel mesh reinforces concrete against heavy vehicle loads, distributing weight evenly and controlling shrinkage cracking to ensure long-term structural durability.
How often should an exposed aggregate driveway be sealed to maintain appearance?
Exposed aggregate driveways should be sealed after curing and resealed every 2 to 3 years to protect the aggregate from oil stains, moss growth, and UV fading.
How does Damp-Proof Membrane (DPM) polythene protect concrete house slabs?
DPM polythene laid under concrete slabs blocks ground moisture from rising through the porous concrete into building interiors, complying with NZS 3604 building standards.
When should expansion saw cuts be made in newly poured concrete driveways?
Expansion saw cuts should be cut within 12 to 24 hours of pouring to control shrinkage cracking, spaced at intervals of roughly 24 to 30 times the slab thickness.

Planning a Driveway or Vehicle Crossing?

Contact Craft Civil Contractors for AT-compliant vehicle crossings & concrete estimates.

Chat with us